Pureco Pearl Sealer is designed for use over any of our paints, sealing transfers, and decoupage.
Australian Made & Owned, Eco Friendly, VOC Free
Satin Sheen, non-yellowing, invisible finish
Suitable for interior and exterior
Water-Based & Water Clean Up
Suitable to use over chalk, mineral, and acrylic paints, stains, and raw timber
Can be used as a decoupage medium (glue)
Coverage is square meters per litre, depending on application technique and surface
It can be tinted with a small amount of any Pureco Paint for a glazed finish.
Clean your surface and ensure it's dry and free from dust.
Stir your product well or stir well before use. Always decant a small amount of product to avoid contaminating your jar. Always do a small test patch first to ensure it is the desired finish and compatible with the paint/stain (of another brand) that you are sealing.
Apply your first coat using a brush, roller, cloth, applicator sponge or spray. I highly recommend using our Applicator Sponges and wiping your sealer over your surface. Use long even motions and avoid drips, spills, or pools of the product for the best result. Note: Pearl sealer is a coloured sealer, apply thin even coats to avoid streaks.
Allow to fully dry before applying your second coat. No more than two coats should be required. Touch dry in 30 Minutes (at 25 °C); Recoat in 4 Hours(at 25 °C).
This product should not be used if the air temperature is below 10 degrees or above 35 degrees.
Do not apply in direct sunlight. Use in a well-ventilated area. Water clean up. 100% washable.
Selecting the best finish for your project can be a confusing and challenging process. Check out our quick and easy Finishes information guide to help you in your decision making process. Get your copy here!