Collection: Pureco Silk Finish

Our silk finish range is 100% washable, no sealer needed, and easy to use.

It is the perfect choice for those who like to paint and go, more suited to smooth clean looks than textured looks.

How to Use
  • Self-sealing, low sheen finish.
  • Always do a test patch to see if this product is right for your project.
  • Easy to clean and stain-resistant finish.
  • Minimal prep is required for your projects. Brush, roller, or spray.
  • Clean the substrate, sand flaking paint off, lightly scuff shiny surfaces to promote adhesion.
  • For best results use a synthetic smooth flat brush in nice even smooth strokes.
  • Sealing, waxing, and top coating are not required.
  • In some cases, you may find some substrates may have tannin bleed-through. Should this happen, use our base & blocker to prevent further staining. 
  • 200ml will cover approx 2-3 square meters and 600ml will cover approx 7-8 square meters in normal conditions. This will definitely depend on the colour choice, whites will require more coats hence cover less square meters.
  • Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
  • Cure time 7 - 14 days. See the Note below.
  • Modern sleek matte to low sheen finish.
  • Able to be shabbied up as you do with Chalk paints.
  • Silk Finish range has a built-in sealer, our sealers can certainly be used on top for extra durability, our waxes are made to be absorbed into the paint surface and may just slide around and not absorb into the coating with the Silk Finish range.
  • Easy clean up with water for brushes, rollers, and spray equipment.
  • 200ml & 600ml 
  • Note: Do not apply paint if the air temperature or substrate temperature is below 10 °C or above 35 °C. The temperature should not fall below 10 °C during the drying process as it will affect the adhesion of the Silk Finish and lengthen the curing process.