Pureco Matte Sealer is designed for use over any of our paints, sealing transfers and decoupage.
Australian Made & Owned, Eco Friendly, VOC Free
Ultra Flat, non-yellowing, invisible finish. Please note use 1 coat only on dark colours as the mattifying agent will give it a cloudy appearance
Suitable for interior
Water-Based & Water Clean Up
Suitable to use over chalk, mineral and acrylic paints, stains and raw timber
Can be used as an image transfer medium
Coverage is 13 square meters per liter, depending on application technique and surface
It can be tinted with a small amount of any Pureco Paint for a glazed finish.
Clean your surface and ensure it's dry and free from dust.
Shake your product well or stir well before use. Always decant a small amount of product to avoid contaminating your jar. Always do a small test patch first to ensure it is the desired finish and compatible with the paint/stain (of another brand) that you are sealing.
Apply your first coat using a brush, roller, cloth, or spray. I highly recommend using a clean, lint-free cloth and wiping your sealer over your surface. Use long even motions and avoid drips, spills or pools of the product for the best result. Tip: If your surface is one colour for example all white or all black add a small drop of your paint to your topcoat and mix well, this will help reduce any streaks and produce a beautiful finish. This will also help reduce the cloudy looking finish over dark colours.
Allow to fully dry before applying your second coat. No more than two coats should be required. Touch dry in 30 Minutes (at 25 °C); Recoat in 4 Hours(at 25 °C).
This product should not be used if the air temperature is below 10 degrees or above 35 degrees. Do not apply in direct sunlight. Use in a well-ventilated area. Water clean up. 100% washable.