- Gloss sealer is our highest sheen level sealer.
- It can be brushed, rolled, or wiped on. Gloss sealer is quite a sticky consistency and water can be added to help application.
- If spraying add up to 10% water.
- 600ml will cover 10-12 square metres
- Apply 2 coats as required
- Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 40 Minutes; Recoat: 3 Hours.
- water clean up
- Exterior/Interior use
- This product should not be used if the air temperature is below 10 degrees or above 35 degrees.
- Do not apply in direct sunlight.
- Use in a well-ventilated area.
- Water clean up. 100% washable.
- Clean your surface and ensure it's dry and free from dust.
- Shake your product well or stir well before use. Always decant a small amount of product to avoid contaminating your jar. Always do a small test patch first to ensure it is the desired finish and compatible with the paint/stain (of another brand) that you are sealing.
- Apply your first coat using a brush, roller, cloth, or spray. I highly recommend using our Applicator Sponges and wiping your sealer over your surface. Use long even motions and avoid drips, spills, or pools of the product for the best result. Tip: If your surface is one colour for example all white or all black add a small drop of your paint to your topcoat and mix well, this will help reduce any streaks and produce a beautiful finish. This will also help reduce the cloudy looking finish over dark colours.
- Allow to fully dry before applying your second coat. No more than two coats should be required. Touch dry in 30 Minutes (at 25 °C); Recoat in 4 Hours(at 25 °C).
This product should not be used if the air temperature is below 10 degrees or above 35 degrees.
Do not apply in direct sunlight. Use in a well-ventilated area. Water clean up. 100% washable.
Selecting the best finish for your project can be a confusing and challenging process. Check out our quick and easy Finishes information guide to help you in your decision making process. Get your copy here!
