Pureco Eggshell Sealer is designed for use over any of our paints, sealing transfers, and decoupage.
Australian Made & Owned, Eco Friendly, VOC Free
Satin Sheen, non-yellowing, invisible finish
Suitable for interior and exterior
Water-Based & Water Clean Up
Suitable to use over chalk, mineral, and acrylic paints, stains, and raw timber
Can be used as a decoupage medium (glue)
Coverage is square meters per liter, depending on application technique and surface
It can be tinted with a small amount of any Pureco Paint for a glazed finish.
Clean your surface and ensure it's dry and free from dust.
Shake your product well or stir well before use. Always decant a small amount of product to avoid contaminating your jar. Always do a small test patch first to ensure it is the desired finish and compatible with the paint/stain (of another brand) that you are sealing.
Apply your first coat using a brush, roller, cloth, or spray. I highly recommend using a clean, lint-free cloth and wiping your sealer over your surface. Use long even motions and avoid drips, spills, or pools of the product for the best result. Tip: If your surface is one colour for example all white or all black add a small drop of your paint to your topcoat and mix well, this will help reduce any streaks and produce a beautiful finish.
Allow to fully dry before applying your second coat. No more than two coats should be required. Touch dry in 30 Minutes (at 25 °C); Recoat in 4 Hours(at 25 °C).
This product should not be used if the air temperature is below 10 degrees or above 35 degrees. Do not apply in direct sunlight. Use in a well-ventilated area. Water clean up. 100% washable.
Selecting the best finish for your project can be a confusing and challenging process. Check out our quick and easy Finishes information guide to help you in your decision making process. Get your copy here!